The machine consists of a motorized hand saw, 230 V/1900 W with guide carriage and tensioning chain for each pipe diameter.
The tensioning chain is to be put around the pipe and tightened by means of the chain tensioner. The guidance vehicle is applied with the hand circular saw. After turning on the motor the saw is inserted. The pipe is then cut by driving around.
A quick, clean and right angled cut is the result.
Cutting depth of 60mm.
The easy handling despite of a high cutting speed and an optimal safety do make the saw indispensable on each construction site.
Chain for standard pipes are available at warehouse. Special dimensions only on request.
Closed, modern steel-sheet construction, vulcanized rubber grating on the aluminium plate wheels, upper and lower precision guide in special building system 90° torsioned, protective doors with easy opening for the sawing blade change, sawing blade completely covered exempt the cutting area, direct drive via three-phase motor and automatic break system acc. to VBG7j.
Cutting power:
Pipe diameters up to 315mm and up to 45° inclination both-sides swivelling (with 250mm up to 67.5° one-side swivelling).
Mode of operating: the pipes are placed on the prism and adapted in the dimensions. The saw including the guides is put into the desired angle position by means of the swivelling lever and the pipe is clamped. By moving ...
The sawing installation RS in extra-solid design has been developed particularly for the exact cutting of plastic pipes and meets highest requirements with-in modern production lines.
The extremely solid saw bow is optimized for operation with low vibration and is driven on precise linear guides. The band drive with high torque performance is equipped with a brake so that any after-running after switching off or after pushing the emergency-off button is avoided. The forward feed is secured against saw forces being too high by means of a safety clutch and totally insensitive to the produced cuttings. The complete forward feed unit is mounted on a high loadable live ring and can easily be turned manually for 45° or 67.5° when being ...
